Saturday, September 7, 2019
General science Research Paper Example | Topics and Well Written Essays - 1500 words
General science - Research Paper Example The first and most apparent recognized use is as communications apparatus with people you already have a strong acquaintance. Email and instantaneous messaging has gone way past the previous adopter phase. For many enterprises, societies and families, it has become one of the prevailing forms of communication. Email is up there with the telephone, and more and more is replacing physical mail and fax. This is fascinating. It took the telephone eons to be at par with this level of acknowledgement for such routine uses. Fax never reached it for personal utilizations (Zittrain, 2009). On the other hand, the Internet has been also used as an information-collecting tool. Reports by Pew Internet Project show that over 50 percent of adult Internet consumers utilized the Internet, most probably, for job-connected research. On any given day, nearly 16 percent of Internet consumers are online doing research. Ninety-four percent of youth ages 12-17 who have Internet access claim that they utiliz e the Internet for social research. Seventy-one percent of online teenagers assert that they utilized the Internet as a key source for their current major school project or report. The History of early medium of communication Example: Printed communication (i.e. books and newspapers), television, and radio According to Wyman( 2009) written communication flourished off developing technology, such like the discovery of paper and printing press. In fact, publishing media is the oldest type of mass media. This media includes newspapers, books and magazines. The conception of books is apparently not new. It is thought that the first ever book in the world was published and printed in 863 AD in China. Although it was the first book to be officially printed, many historians assert that books had been released way before this period. On the other hand, newspapers are not as well new. They were invented during the seventeenth century in Britain and by the nineteenth century were widespread m ass media. The publishing media is currently the only source of mass communication. However, there has been considerable fall in its prominence but yet is a very essential source of mass media among the massive masses (Zittrain, 2009). Even now, radio remain a very prevailing means of communication and there are numerous kinds of radio utilized by institutions and people for the purpose of conveying information. Radio is used to send messages through signals by commonly modulation and many other means. It is characteristically utilized institutions and person who are far way from each other but need to maintain a constant communication. The idea of the television developed from the concept of being capable of see an individual while interacting with him on the phone. The social, political, and technical forces that have sustained the dominance of the medium of communication. Example: military interest, media enthusiasm and public triumphs In the communications niche, Motorola brough t about innovation. In 1983, Motorola introduced the first industrial portable cell phone, known as Motorola DynaTac 8000X phone. This as a result transformed how the world communicates. The corporation was the pioneer for radio communications. In the year 1940 Motorola grew its first handheld radio, the Handie-Talkie transferable two-way radio, designed for the United States military. This was followed by increased production of two-way
Friday, September 6, 2019
Masculinity in Science Fiction Essay Example for Free
Masculinity in Science Fiction Essay Throughout the past couple of centuries science fiction has become one of the most popular genres worldwide. Thousands of people of different age, gender, racial and ethnical origin submerge into a world where the level of technological development is incredibly high, and where the machines often seem to dominate their creators, humans. To begin the essay we should first give the definition for what the science fiction is. So, the Wikipedia says that: ââ¬Å"Science fiction is a form of speculative fiction principally dealing with the impact of imagined science and technology upon society and persons as individuals. â⬠Scientists have long been arguing about the reasons that make science fiction so popular among the readers. The realm, depicted in science fiction novels isnââ¬â¢t magical or fairy, like the fantasy world is. On the contrary, itââ¬â¢s often more cruel and merciless than our reality is. One of the main hypothesis is that people like to drift into the worlds of robots, intelligent machines and spaceships because there the easy ways to solving the emerging problems exist. In most of those books there is little attention paid to the human to human relations. On the contrary, the problems that are dealt in science fiction novels are rather more global than the relations between the individuals. The authors of this kind of books prefer to write about the rise and fall of the empires, about the giant wars, won or lost with the help of the mind, intrigues and power. For lots of people in our Western, highly individualistic world, reading science fiction books is one of the few ways to forget about the necessity to maintain and keep social relations with others. Nowadays, when the society allows us, its members, to open and develop our individuality freely, communication between the individuals becomes more and more complicated, as people, given the opportunity to develop the way they want, find more differences between each other, so that they have less in common with each passing year. This fact, combined with the absence of the defined standards of communication that existed in traditional societies, make communication a tough task for the contemporary people. Itââ¬â¢s well known, that women adapt easier and faster than the man do, thus they experience less difficulties in adjusting to this new way of communication. On the contrary, men are those who sometimes experience severe troubles when some advanced form of social interaction is required. Thus, man read science fiction in order to transfer themselves in the world where mind and power decide a lot, and emotions are usually seen as something lateral and even useless. This hypothesis is confirmed by the fact that males comprise the main auditory for the books, shows and films in this genre. In order to better understand what is science fiction about, and why is it preferred by man, weââ¬â¢ll research the inner genres science fiction has in it. Kay Fowler offers his classification for the genres of science fiction which is: World at Risk SF and Apocalyptic Science Fiction Political/Massive War/Doomsday Weapons Disaster Alien Invasion/Conquest of Earth Plague/Disease/Epidemic Agricultural/Ecological/Population Disasters Far Future or Ancient History-Future History . Utopias/Dystopias/and in-between Utopia near utopias; ambiguous utopias, heterotopias Dystopias Alternate Earth/Alternate History (What If?) Time Travel, Time Paradoxes, Time Patrolling, Time Wars, Alternate Time Lines Religion/Theology/Anti-religion and Science Fiction Space Opera Robots, Androids, Cyborgs, Clones and Cyberbunk/Virtual Reality, Genetic Engineering, and Nanotechnology. World Building/Terraforming/Scientific and Social Inventiveness ESP/Telepathy/Psi Powers Underwater living/ocean worlds Human Colonization/Conquest of Other Worlds Feminist Science Fiction/Alternate Sexualities/Gender Benders SF with a theme of deafness or a focus on non-oral communication (Kay Fowler, Themes/Genres in Science Fiction: An idiosyncratic and woefully incomplete list) As you can note from the list above, science fiction is mostly the literature of action, the field of action for the active people, warriors, politicians and scientists, where there is little place for emotions and emotional life. Contemporary critics say that science fiction is one of the genres whose main characteristic is reflecting and reproducing masculinity, creating the specific, sometimes even perverted image of it in the minds of those who fancy this kind of literature. Of course, some researchers of the SF literature consider that: ââ¬Å"science fiction â⬠¦ seem(s) also to promise more freedom than do non-genre literature to imagine alternatives to the privileged assumptions of heterosexuality and masculinity that suffuse our cultureà », as it is noted in The Queer Encyclopedia of the Visual Arts. à But, in the reality, the authors of the SF books put ââ¬Å"the male as the central role and in a position of powerâ⬠, as it is noted in the article Science fictionââ¬â¢s use of Utopian and Dystopian visions of the future in relation to challenging boundaries of gender and / or sexuality. Today, when the amount of novels, stories and tales written in this genre is enormous, science fiction authors will do anything to attract the readerââ¬â¢s attention to their novel. Some years ago, when the SF began its rapid development, it was new and original to make the protagonist of the story female. Unfortunately, for most of the SF writers it meant only the change of setting or decorations, not touching the key points of their writings. To attract the readersââ¬â¢ (and, as we can recall, those are mostly males) attention theyà provide their main protagonist with huge eyes and breasts, enormously long legs and a tempting smile, but inside their ââ¬Å"heroinesâ⬠are as masculine as any male monster slayer with the huge gun is. Thus, changing the decorations for their stories, the authors evade the convictions in gender discrimination, in the same time attracting new waves of male readers who are longing to read about the long-legged half-naked amazons fighting with the evil. Thus, the heroes of science fiction novels are mostly males to the marrow of their bones, and it doesnââ¬â¢t depend of their physical sex. Science fiction literature usually describes conflict situations, like war, ethical, racial or cultural conflicts. The protagonists of the science fiction stories are always the people of action; those who possess notable decision-making skills, and are able to actualize their choices immediately. If we analyze current researches in the field of gender psychology, a conclusion can be deduced that those qualities characterize mostly males, while women are considered to be more of the facilitators, peace makers. Stereotypical women behavior is characterized by irrationality, whichââ¬â¢s doesnââ¬â¢t belong to the features that characterize this genre. A considerable part of science fiction novels and stories are characterized by the external conflict between the protagonists of the story. Of course the existing external conflict in science fiction, like in some of the other genres, is often the reflection of the internal protagonistââ¬â¢s conflict, but in most science fiction stories this internal clash is moved on the background of the story. Most SF stories are written for the man to allow them to drift into the world, where power and mind is the key to solving all of the existing problems. The external conflict in the story is usually characterized by the considerable amount of power the opposing characters possess, for whether it is physical or mental. Power is the key to becoming a winner in the clash, whichââ¬â¢s the only goal the masculine protagonists usually have in mind. Another gaze into the gender psychology study book provides us with the information that the necessity to prove oneââ¬â¢s superiority by becoming a winner in some conflict is also mainly male characteristic. Science fiction novels are usually the stories describing concrete situations, where the plot develops, and one event causes another. To cut the long story short, SF books are usually based on logical interpretation of the events. The causal consecutive ties there are usually very strong, thus there are usually little unfinished plot lines and the events that do not have any substantional meaning to the development of the plot of the story. All the technologies used in the story are scientifically validated, the principles of their operation are usually explained or understandable to the readers, in contradiction to the principles that stipulate the usage of magic in fantasy books. à One of the reasons for which less women read science fiction than man do, is the lack of the elements of decoration that make the book ââ¬Å"aliveâ⬠in womenââ¬â¢s opinion. In the feminine literature the event that is described or the person that appeared may be introduced only in order to help the reader to feel the atmosphere of the setting described by the author. Only few of the science fiction novels hold such seemingly useless elements in them, while in all of the others ââ¬Å"every gun thatââ¬â¢s hanging on the wall is going to fireâ⬠, and every person appearing, and every action been committed are the basis for some further development of the plot, as Justine Larbalestier proves in his research book The Battle of the Sexes in Science Fiction. Science fiction novelsââ¬â¢ protagonists are also often characterized by their orientation on victory. Itââ¬â¢s a usual pattern of action for the SF heroes to fight the things they donââ¬â¢t like or donââ¬â¢t understand. They rarely seek for the round-abouts for reaching their goals, preferring the straight and habitual way of defeating and destroying the things that prevent them from getting the needed things. Such a way of solving the problems is also mostly male characteristic. For women the strategy would rather be to understand the enemy, to find the reasons for which heââ¬â¢s opposing and try to get rid of them, preferably uniting their forces with the past rivals. Women tend to understand and not to fight, as destroying diverges with the basic female ideals, while creation is their field. à But, as we can note, there are fewer science fiction novels that tell about the cooperation between the aliens and people, than of those, that describe the wars between the different races. In addition, most of the novels that actually describe that cooperation show it is based on the military, political or economic needs only. Actually, the situation with the aliensââ¬â¢ psycho type for lots of SF writers is the same as it is with gender appurtenant of the protagonists. The description of the aliensââ¬â¢ phenotype is called to create the impression in the consumerââ¬â¢s mind that humans in the story are contacting with the creatures totally different from them, but if the reader looks closer he begins to feel himself pigeoned, as there are the same humans under the scary carnival masks. Unfortunately, only a small amount of the writers puts an effort to design the psycho type different from the humansââ¬â¢ one.à Of course, most of them donââ¬â¢t even need it, as itââ¬â¢s not necessary and is even harmful to research the enemyââ¬â¢s psychology thoroughly, as it may summon sympathy or, whichââ¬â¢s even worse, the desire to find the reasons for the antagonistââ¬â¢s inappropriate behavior. Psychologists prove this is typically masculine approach to problem-solving. Thatââ¬â¢s why only a few books describe cultural cooperation between the people and aliens. Human to human cooperation has been thoroughly researched and described, so itââ¬â¢s ineffective to create the ââ¬Å"human in masksâ⬠type of aliens, while creating and designing the psychology of the race much different from humans requires lots of time and effort. Science fiction got its name because of the numerous elements of scientific research and the results of progress that characterize the books written in this genre. Science is the world of rationality, of the casual-consecutive bonds, where all the events have their reasons, and provoke certain consequences, the world where the miracle is unlikely, because it deprives that world of the reality it possesses. Introducing miracle in SF novel is the same as bringing the atomic bomb into the world of the faeries and dragons. If it is done without the proper skills only the excellent writers possess, those new elements ruin the authenticity of the imaginary world, making it look like a childââ¬â¢s picture with the broken proportions. SF world is primordially opposite to the womanââ¬â¢ irrational view of the surrounding world, the place where the content is valued and the form is neglected. Most of the science fiction worlds demand their protagonist to belong to one of the two categories, either the warrior or the scientist, in order to survive in the surrounding society. Of course there are woman whose nature is of one of this two types, but for most of the females those roles are unfamiliar and unwanted. It sometimes happens in the SF that the woman have to play those roles despite of their desires or longings in order to survive, but most writers prefer to describe the beings that feel themselves comfortable in those two roles, as only than their heroes are capable of actualizing their hidden potential and revealing some of the inner qualities.à Thus they prefer to write about males, who are naturally designed to play those roles. It is also important for the science fiction protagonist to be centered on the goals put before him by the gods, doom or just the consequences, and the science fiction writers know that man are much more suitable for this role than woman are. Realistic heroine will be distracted dozens of times a day from her high mission by the cute kitty mioving, new wrinkle appeared or the handsome man walking nearby. It is also worthy of mentioning that science fiction literature rarely describes the societies where the humanââ¬â¢s individuality is valued. For most of the heroes their surroundings are not valued for their personal qualities, but for the things they can do, thus the notion of personality is often replaced by the notion of function in the mind of the protagonist of the SF novel. This also belongs to the typical masculine qualities, described by the gender psychologists. Te contemporary world becomes more and more feminine with each passing year, and the science fiction is often used to , distract the malesââ¬â¢ attention from this fact. Using the example of Terminator 2, Amanda Fernbach in her article The Fetishization of Masculinity in Science Fiction: The Cyborg and the Console Cowboy says that: ââ¬Å"Ordinary masculinity lacks, and the technological Terminator represents a fetishized, idealized masculinity that is a desirable alternative. In Terminator 2, the Terminator represents an idealized phallic masculinity heavily dependent upon technofetishes to ward off the anxieties of the male spectator faced with the prospect of a future vision of castrated masculinity. Although he learns to make jokes, the Terminator admits he could never cry. He becomes more human in every way except those that display weakness or vulnerability.â⬠Thus we can make a conclusion that science fiction is a genre designed specially for man in order to solve some of their psychological problems and satisfy some of their needs. SF is designed for man and about them, at least most of the examples are. References Fernbach, Aà 2000, The Fetishization of Masculinity in Science Fiction: The Cyborg and the Console Cowboy. Science Fiction Studies, Volume 27, Part 2 Fowler. K 1999, Themes/Genres in Science Fiction:à An idiosyncratic and woefully incomplete list. Ramaro College of New-Jersey. Viewed 11 May, 2005. à http://orion.ramapo.edu/~kfowler/sfthemes.html Larbalestier, J 2002, The Battle of the Sexes in Science Fiction. Wesleyan University Press Science fiction. Wikipedia Online Encyclopedia. Viewed 11 May, 2005à à à à à à à à à à à à à à à à à à à à à à http://en.wikipedia.org/wiki/Science_fiction Science fictionââ¬â¢s use of Utopian and Dystopian visions of the future in relation to challenging boundaries of gender and / or sexuality. 2002,à Viewed 11 May, 2005 http://www.corneredangel.com/amwess/papers/sf_gits_esca.doc. Summers. C (ed) 2004, The Queer Encyclopedia of the Visual Arts. Cleis Press.
Thursday, September 5, 2019
Advantages and Disadvantages of Ethernet
Advantages and Disadvantages of Ethernet A 10Base2, or thin Ethernet, network uses thin 3/16-inch coaxial cable (with 50-ohm) impedance for the network backbone. Thin coaxial cable is much easier to prepare and install than thick Ethernet cable which means transfer rate of 10 Megabits per second that uses baseband signaling, with a contiguous cable segment length of 100 meters and a maximum of 2 segments. 10Base5: 10Base5 uses thick coaxial cable. This version is the original Ethernet. It can operate at up to 10 Mbps and support cable segments of up to 500 meters which uses baseband signaling, with 5 continuous segments not exceeding 100 meters per segment. It is also known as thick Ethernet or ThickNet. 10Base-T: 10BaseT is a baseband 802.3-based Ethernet network that uses unshielded twisted-pair (UTP) cable and a star topology. This version can operate at up to 10 Mbps which uses baseband signaling and twisted pair cabling. It is also known as twisted-pair Ethernet or UTP Ethernet. Features: 10BASE-T uses Manchester-encoding over two unshielded twisted-pair cables. The early implementations of 10BASE-T used Cat3 cabling. However, Cat5 or later cabling is typically used today. 10 Mbps Ethernet is considered to be classic Ethernet and uses a physical star topology. Ethernet 10BASE-T links could be up to 100 meters in length before requiring a hub or repeater. 10BASE-T uses two pairs of a four-pair cable and is terminated at each end with an 8-pin RJ-45 connector. The pair connected to pins 1 and 2 are used for transmitting and the pair connected to pins 3 and 6 are used for receiving. The figure shows the RJ45 pin out used with 10BASE-T Ethernet. 10BASE-T is generally not chosen for new LAN installations. However, there are still many 10BASE-T Ethernet networks in existence today. The replacement of hubs with switches in 10BASE-T networks has greatly increased the throughput available to these networks and has given Legacy Ethernet greater longevity. The 10BASE-T links connected to a switch can support either half-duplex or full-duplex operation. Advantages: Since each node on a 10 Base-T network has its own cable connecting it to a central hub, it is far less likely that any node can cause the entire network to fail. The hub also has a partitioning function built into it which allows it to detect a problem on any of its ports. If a problem is found, the node is disconnected from the rest of the network. This isolates the problem until the node can be troubleshot and repaired. Because of the partitioning function built in to the hubs and the star-wired topology, it is generally easy to troubleshoot a 10 Base-T network. In a worst-case scenario, one can be troubleshot by simply disconnecting nodes from the hub one at a time until the network recovers. Usually, the hub will give an indication as to which node is causing a problem, allowing the technician to troubleshoot that node as opposed to spending many hours finding where the problem is. Disadvantages: 10 Base-T only allows distances from the hub to the node of 100 meters. In some installations, this can be a major problem if nodes need to be located farther away. The nature of UTP cable makes it considerably more sensitive to electrical noise than coaxial cable. Generally, this rules 10 Base-T out as an option for installations on factory floor environments or other locations with a high ambient noise level. What are the different types of networking / internetworking devices? Explain the basic features of these devices. Following are the networking / internetworking devices with their basic features. Network Router: A network device, typically connected to a range of LAN and WAN interfaces, that forwards packets based on their destination IP address. Routers receives an incoming frame, discards the data-link header and trailer, makes a forwarding decision based on the destination IP address, adds a new data-link header and trailer based on the outgoing interface, and forwards the new frame out the outgoing interface. Network Repeater: A repeater is a physical layer device. It receives, amplifies (regenerates) and retransmits signals in both directions. As far as the software is concerned, a series of cable segments connected by repeaters is not different from a single cable (except by some delay introduced by repeaters). A system may contain multiple cable segments and multiple repeaters. But no two transceivers may be more than 2.5 km apart and no path between any two transceivers may be traverse more than four repeaters. Bridge: A bridge is a data link layer device which is used to connect multiple LANs. It examines the data link layer addresses to do routing. Since they are not supposed to examine the payload field of the frames they route, they can transport IPV4, IPV6, Apple Talk, ATM, OSI or any other kinds of packets. Gateway: A gateway can translate information between different network data formats or network architectures. Suppose a computer using the connection-oriented TCP/IP protocol needs to talk to a computer using the connection-oriented ATM transport protocol. The gateway can copy the packets from one connection to the other, reformatting them as need be. Switches: Switches are similar to bridges in that both route on frame addresses. In fact, many people use the terms interchangeably. The main difference is that a switch is most often used to connect individual computers. As a consequence, when a computer wants to send a frame to another the bridge gets the frame but just discards it. But the switch must actively forward the frame to other because there is no other way for the frame to get there. What is the range of addresses in the classes of internet addresses? Evaluate each class of logical addresses. There are five IP address classes, following table show each class and the range of addresses. Class Beginning Address Ending Address A 0.0.0.0 127.255.255.255 B 128.0.0.0 191.255.255.255 C 192.0.0.0 223.255.255.255 D 224.0.0.0 239.255.255.255 E 240.0.0.0 255.255.255.255 In Class A through Class E. each is used with a different type of network. The address classes reflect the size of the network, and whether the packet is unicast or multicast. In the unicast method of transmission, one copy of each packet is sent to each target destination. If there are eight workstations designated to receive a packet, such as a portion of a video clip, then it is transmitted eight times. In the multicast method, the recipients are placed in a group, such a group of all eight workstations. Only one packet is sent to the group, via a router or switch, which then packet to each group members. Class A is used for the largest networks composed of up to 16,777,216 nodes. Class A networks are identified by a value between 1 and 126 in the first position of the dotted decimal address. The network ID is the first 8 bits and the host ID is the last 24 bits. Class B is for medium-sized network composed of up to 65,536 nodes and it is identified by the first octet of bits ranging from decimal 128 to 191. The first two octets are the network ID, and the last two are the host ID. Class C addresses are used for network communication on small networks of 256 nodes or less. The first octet translates to a decimal value in the range of 192 to 223 and the network ID is contained in first 24 bits, while the host ID is contained in the last 8 bits. Class D addresses do not reflect the network size, only that the communication is a multicast. Unlike Classes A through C, the four octets are used to specify a group of nodes to receive the multicast, which consists of those nodes that are multicast subscription members. Class E is used for experimentation and address range from 240 to 239.255.255.255 in the first octet. Task 2 What is Bandwidth? Explain the other factors for network communications. Network bandwidth is the measure of the data carrying capacity of the network. When simultaneous communications are attempted across the network, the demand for network bandwidth can exceed its availability. The obvious fix for this situation is to increase the amount of available bandwidth. But, because of the previously stated constraints, this is not always possible. In most cases, when the volume of packets is greater than what can be transported across the network, devices queue the packets in memory until resources become available to transmit them. Queuing packets causes delay. If the number of packets to be queued continues to increase, the memory queues fill up and packets are dropped. The characteristics of the information being communicated also affect its management. For example, the delivery of a movie uses a relatively large amount of network resources when it is delivered continuously without interruption. Other types of service e-mail, for example are not nearly as demanding on the network. In one company, an administrator might decide to allocate the greatest share of the network resources to the movie, believing that this is the priority for his customers. This administrator may decide that the impact will be minimal if e-mail users have to wait a few additional seconds for their e-mail to arrive. In another company, the quality of a video stream is not as important as critical process control information that operates the manufacturing machinery. What is Physical address and what is the difference between Physical address and Logical address? Explain it in detail. The Physical address is specific on the local network and it represents the address of the end device on the physical media. In an Ethernet using LAN, this address is also called as Media Access Control address. On the local Ethernet network, when two end devices communicate, the frames that are exchanged between them contain the destination and source Media Access Control (MAC) addresses. It is in hexadecimal notation assigned by manufacturer. This address is much like postal address because it enables communication to be sent to specific destination. Physical address is 48-bit address burned into the ROM of the NIC card which is a Layer 1 device of the OSI model. This is divided into 24-bit vendor code and 24-bit serial address. This is unique for each system and cannot be changed. While the logical address is a 32- bit address assigned to each system in a network. This works in Layer3 of OSI Model which is generally called IP address. What is the difference between Layer 1, Layer 2 and Layer 3 devices? Describe it according to the Layers features. OSI model have 7 layers which perform many different functions. Every layer has its own unique features and function and a device which help the layers to work properly. Layer 1 is called Physical layer which consists of hardware, developed by engineers, in the form of electronic circuitry, media, and connectors. Therefore, it is appropriate that the standards governing this hardware are defined by the relevant electrical and communications engineering organizations. By comparison, the protocols and operations of the upper OSI layers are performed by software and are designed by software engineers and computer scientists. As we saw in a previous chapter, the services and protocols in the TCP/IP suite are defined by the Internet Engineering Task Force (IETF) in RFCs. Hardware components such as network adapters (NICs), interfaces and connectors, cable materials, and cable designs are all specified in standards associated with the Physical layer. Layer 2 is called Data Link layer and its services and specifications are defined by multiple standards based on a variety of technologies and media to which the protocols are applied. Some of these standards integrate both Layer 2 and Layer 1 services. A hub is an example of a layer 2 device. Switches are generally considered layer 2 devices, but many are capable of operating at layers 3, 4 or higher. Router is the Layer 3 device. The role of the router is to select paths for and direct packets toward their destination. This process is known as routing. During the routing through an internetwork, the packet may traverse many intermediary devices. Each route that a packet takes to reach the next device is called a hop. As the packet is forwarded, its contents (the Transport layer PDU), remain intact until the destination host is reached. Task 3 Explain 7 OSI layers briefly and define Router, Switch, and Bridge. Explain about encryption decryption. OSI Layers: The Open Systems Interconnection (OSI) model was initially designed by the International Organization for Standardization (ISO) that provides a framework on which to build a suite of open systems protocols. The objective was that this set of protocols would be used to develop an independent international network that would not be dependent on proprietary systems. Unfortunately, due to the rate at which it expanded, and the speed at which the TCP/IP based Internet was adopted, the OSI Protocol Suite development and acceptance lagged behind. Although few of the protocols, which are in widespread use today, are developed by using the OSI specifications, the major contribution has been made by the seven-layer OSI model in the development of other products and protocols for all types of new networks. The OSI model provides an extensive list of functions and services as a reference model that can occur at each layer. It also depicts the interaction of each layer with the directly above and below layers. No. Layer Name Description 7 Application Performs services for the applications used by the end users. 6 Presentation Perform data format information to the application. For example, the presentation layer tells the application layer whether there is encryption or whether it is s .jgp picture. 5 Session Manages sessions between users. For example, the session layer will synchronize multiple web sessions and voice and video data in web conferences. 4 Transport Defines data segments and numbers them at the source, transfers the data and reasonable the data at the destination. 3 Network Creates and addresses packets for end-to-end delivery through intermediary devices in other networks. 2 Data Link Creates and addresses frames for host-to-host delivery on the local LANs and between WAN devices. 1 Physical Transmits binary data over media between devices. Physical layer protocols define media specifications. Router: A network device, connected to a range of WAN and LAN interfaces that sends packets according to their destination IP address. Routers acquires an incoming frame, puts away the data-link header and trailer, makes a forwarding decision based on the destination IP address, adds a new data-link header and trailer based on the outgoing interface, and forwards the new frame out the outgoing interface. Switch: Switches are similar to bridges in that both route on frame addresses. In fact, many people use the terms interchangeably. The main dissimilarity is that a switch is commonly used to connect one-on-one computers. As a consequence, when a computer wants to send a frame to another the bridge gets the frame but just discards it. But the switch must actively forward the frame to other because there is no other way for the frame to get there. Bridge: A bridge is a data link layer device which is used to connect multiple LANs. It examines the data link layer addresses to do routing. Since they are not supposed to examine the payload field of the frames they route, they can transport IPV4, IPV6, Apple Talk, ATM, OSI or any other kinds of packets. Encryption: The process of obscuring information to make to unreadable without special knowledge, sometimes referred to as scrambling. The process takes the data to be encrypted and applies a mathematical formula to it along with a secret number (called an encryption key). The resulting value, which is called an encryption packet, is sent through a network. Decryption: It is the process of decoding data the back to its original form by giving that encryption key.
Wednesday, September 4, 2019
The Abolition of Man as Wake Up Call Essay -- Abolition of Man Essays
The Abolition of Man as Wake Up Call à There are three very important ideas that C. S. Lewis explicates in his book, The Abolition of Man. The first essay focuses on moral subjectivism, the second on the Tao, and the third on the consequences of living in a morally relativist society. As a dramatic conclusion to these essays, Lewis asserts that if we do not carefully educate ourselves and accept the authority of the Tao we may become heartless men and women, incapable of governing a society of justice and values. à In the first essay, Lewis communicates his philosophy that education plays an important part in the development of ethical values. In addition to this statement, Lewis asserts that children's readers, guised as harmless texts, can convey hidden messages that have potential to harm a child's developing worldview. Much of the first essay is focused on a schoolbook Lewis called "The Green Book". Although Lewis chose a specific model for "The Green Book", it could easily be any one of a whole generation of schoolbooks. Unfortunately, instead of teaching grammar and good writing as these books profess to do, students learn moral relativism. Lewis, who supports the idea of a Tao, natural law, in the next chapter, believes that youth educated by moral relativism are actually being denied the education needed to appreciate the philosophical claim that certain objects and ideas should hold on them as human beings. Lewis believes that a good education should link their experiences to the prope r emotion. By reinforcing emotional reactions to beautiful objects, values could be ingrained in their minds. By having a system of belief in their consciousness, they were given a vaccination against savagery. Their hearts kne... ...ingrained in our minds that we should be able to choose good without having to stop and think about why we value our choice as good. Antigone is a perfect example of this; she boldly defied the law of the state put forth by Creon because she believed, without question, that her brother's dead body deserved to be buried. It is worth noting that in both of these works, and quite possibly in all of human experience, that natural law (or Tao) comes from a deep authority rather than a power of a state or of one person. In both Abolition of Man and "Antigone," the power of subjective law is always less powerful than the authority of the Tao. The abolition of man provides a clear warning to readers that we, as educated people and consumers of future "Green Books," should heed carefully. à Works Cited: Lewis, C. S. The Abolition of Man. New York: Macmillan, 1965.
Tuesday, September 3, 2019
The Role of Nature in the poetry of William Wordsworth Essay -- Litera
In William Wordsworthââ¬â¢s poems, the role of nature plays a more reassuring and pivotal r ole within them. To Wordsworthââ¬â¢s poetry, interacting with nature represents the forces of the natural world. Throughout the three poems, Resolution and Independence, Tintern Abbey, and Michael, which will be discussed in this essay, nature is seen prominently as an everlasting- individual figure, which gives his audience as well as Wordsworth, himself, a sense of console. In all three poems, Wordsworth views nature and human beings as complementary elements of a sum of a whole, recognizing that humans are a sum of nature. Therefore, looking at the world as a soothing being of which he is a part of, Wordsworth looks at nature and sees the benevolence of the divinity aspects behind them. For Wordsworth, the world itself, in all its glory, can be a place of suffering, which surely occurs within the world; Wordsworth is still comforted with the belief that all things happen by the hands of the divinity and the just and divine order of nature, itself. In William Wordsworthââ¬â¢s poem, Resolution and Independence, Wordsworth describes the moods of the poem through the description of nature. The first appearance of the speaker, himself, is shown in (line 15); where he classifies himself as a traveler who has been seduced, as he states, ââ¬Å"The pleasant season did my heart employâ⬠(line 19). We see the traveler as a bright and joyful person as Wordsworthââ¬â¢s characteristics of nature as a means of description continues throughout the poem. As the poem progresses, the speakerââ¬â¢s attitude changes in (line 26), where he tells us that his mood is lowered. It is here that the speaker presents himself as ââ¬Å"a happy child of earthâ⬠in (line 31); as once again Wordsworth... .../ Of the unfinished sheepfold may be seen / Besides the boisterous brook of Greenhead Ghyll,â⬠showing the growth of human beings in relative notion to nature. William Wordsworth has respect and has great admiration for nature. This is quite evident in all three of his poems; the Resolution and Independence, Tintern Abbey and Michael in that, his philosophy on the divinity, immortality and innocence of humans are elucidated in his connection with nature. For Wordsworth, himself, nature has a spirit, a soul of its own, and to know is to experience nature with all of your senses. In all three of his poems there are many references to seeing, hearing and feeling his surroundings. He speaks of hills, the woods, the rivers and streams, and the fields. Wordsworth comprehends, in each of us, that there is a natural resemblance to ourselves and the background of nature.
Monday, September 2, 2019
Dont Mess with Nature :: science
Don't Mess with Nature Of all the things a student needs to make it through a typical day, probably the most important, yet least appreciated, is paper. Paper is used for academic, social, and personal purposes by nearly all students every day. The most obvious use is for the academic or classroom assignment, whether it comes in the form of a test, an essay, or a summary of plant life on Easter Island. The social uses of paper center around the "note," which any student can tell you is s important a part of a studentââ¬â¢s social life as Friday night ball games or the Junior Prom. As for the personal applications, there is doodling for the nervous mind, and there is scrunching for the nervous hand. The traditional paper airplanes and spit wads are still around, but they seem less popular than in days gone by-probably because it is easier for a student to move freely about the classroom today than it used to be. In any case, there can be no doubt that paper is just as important as ever to the student whose days would be a waste without it. Not only students, but everyone needs paper. Just as students use the paper, so does everyone else. The social purpose surrounds the mail, which we receive everyday. For personal use, thereââ¬â¢s the diary and the note pads to remind us the things we need to remember. There are many examples that I can give for instance, paper plates, paper bags, cardboard boxes, etcâ⬠¦ Anyhow, the point that I am deriving at is that paper and cardboard boxes are all made from trees. Millions of trees are being destroyed every year to produce paper. Not only for paper, but for housing projects as well. New programs are being set up to plant trees in replace of the destroyed ones. Little do people realize how much damage could be done when dealing with nature. These housing projects are built, where beautiful trees use to sit letting cool breeze pass through their leaves. Now, the Recycling foundation has set up a program for young kids to plant trees in their neighborhood to save "Mother Earth." These trees are being planted at almost every street corner. The kids donââ¬â¢t know whatââ¬â¢s likely to happen. They think they are doing good for their community. Now, trees as thick as fifteen baseballs put together, creep up underneath the sidewalk all over town.
Sunday, September 1, 2019
Baumolââ¬â¢s ââ¬ÅSales Maximisation Hypothesis?ââ¬Â Essay
To what extent does empirical evidence on corporate objectives support the predictions of Baumolââ¬â¢s ââ¬Å"Sales Maximisation Hypothesis?â⬠In Neo-Classical Economic theory of a firm, the owners of a firm are involved in the day to day running of the firm, and therefore their main desire is profit maximisation. In reality firms are most likely run by managers and not by the owners. Because of this there is a lack of goal congruence between the two. Baumol (1959) suggests that manager controlled firms are more likely to have sales revenue maximisation as their main goals rather than profit maximisation favoured by shareholders. He shows that there are several explanations for the managerial emphasis on sales maximisation rather than maximising profits: sources of debt closely monitor sales of firms and are more willing to finance firms with growing or large sales figures; lay- off necessitated by fall in sales leads to industrial unrest and unfavourable investment climate; and with decreased sales (and consequently decreased market power) the firm enjoys lesser powers to adopt effective competitive tactics. As well as managersââ¬â¢ power and prestige and even salaries are more closely correlated with sales as to profits. Judged in this perspective, sales maximisation can be said to be the independent objective in managerial decision making, where ownership and management are clearly separated. This review of evidence will examine the advantages and limitations of Baumols theory on sales-maximisation. The majority of empirical evidence shows that there little correlation between the remuneration of top managers and the profit performance of their companys, instead sale revenue is seen as the major contributor to the salaries of managers. McGuire et al. (1962) tried to test Baumols contention that managers salaries are much more closely related to scale of operations of the firm than with profitability. They devised simple correlation coefficients between executive income and sales revenue and profits over the seven-year period 1953-9 for 45 of the largest 100 industrial corporations in the US. Their research showed that the correlation between salaries and sales was much greater than with profits. They recognise that there are serious limitations with using simple correlation analysis and the fact that correlation does not necessarily imply causation. Due to this the resear ch they done cannot be proved to be conclusive. D. R. Roberts found that executive earnings are correlated closely with the size of sales and not the level of profits. He used a cross section of 77 american firms for the period 1948-50. This evidence supports Baumols claim that managers have strong reason to pursue expansion of sales rather than increase profits. Conyon and Gregg (1994) produced a study of 177 firms between 1985 and 1990, it showed that pay of the top executives in large companies in the UK was most strongly related to relative sales growth (i.e. relative to competitors). They also found that it was only weakly related to a long term performance measure (total shareholder returns) and not at all to current accounting profit. Furthermore, growth in sales resulting from takeovers was more highly rewarded than internal growth. This evidence supports baumols presumption that sales maximisation is better related than profit, to executive rewards and corporate performance. Profitability and executive pay appear to be largely unrelated, suggesting that other managerial objectives might be given priority e.g. sales revenue. However total remuneration packages for top executives may be linked to profitabilit y, helping to align the interests of managersââ¬â¢ more closely to the interests of shareholders. Shipley (1981), in a major study concluded that only 15.9% of 728 UK firms questioned are true profit maximisers. The majority of the firms answered that the aim of their firms is for satisfactory profits. Hornby (1994) conducted a study off 77 Scottish companies and found that only 25% of the respondents are profit maximisers according to the ââ¬ËShipley testââ¬â¢. And again the majority of the firms preferred satisfactory profits to profit maximisation. Although the study tells us little about sales maximisation, Shipley found that it was ranked fourth among principle pricing objectives, and nearly half the firms included sales revenue as at least part of their set of objectives. Larger companies were the ones that cited sales revenue as their principal goal. Since larger companies have a greater separation between ownership and management control, this lends support to Baumols theory. Marby and Siders (1966/7) computed correlation coefficients between sales and profits over 12 years, 1952-63, for 120 large American organisations. Zero or negative correlations between profits and sales would support Baumols hypothesis. The findings showed positive significant correlations between sales revenues and profits. This does not necessarily contradict Baumols hypothesis as sales and profits are positively correlated in Baumols model up to the point of maximising profits. Even when they concentrated on ââ¬Ëreliableââ¬â¢ data from 25 companies which they thought had been operating at scales of output beyond the levels corresponding to maximum profit. Correlations between profits and sales were still mostly positive. This evidence is interpreted as refuting the sales-maximisation hypothesis. These studies argue the case for and against Baumols theory of sales-maximisation. Although there have been many studies conducted to test Baumols hypothesis, the empirical evidence is not conclusive in favour for or against the sales-maximisation hypothesis. Many argue that Baumols theory has many flaws, such persons are M H Peston and J R Wildsmith. Behavioural theory opposes the idea of a firm seeking to maximise any objective. Management are more likely to hold a set of minimum targets to hold the various stakeholder groups in balance. In practice, profit maximisation in the long term is a major goal for firms, but sales revenue is an important short term goal, though even here a profit target may still be part of the goal set. A widely used technique in the management of larger firms, portfolio planning, would seem to support the behaviourist view that no single objective will usefully help predict firm behaviour in a given market. In Neo-Classical Economic theory of a firm it suggests, the owners of a firm are involved in the day to day running of the firm, and therefore their main desire is profit maximisation. Managers are supposed to maximise shareholders wealth by investment means such as CAPM, NPV and ARR. This is the traditional means for the modern day manager to increase shareholder wealth. Agency theory explains that shareholders and managers have a relationship which is crucial to the modern firm. Managers run the company on behalf shareholder and shareholders will reward them with high salary. However this is not always the case as human nature dictates that self-interest, wealth, and power will come into the equation. Managers may start building empire, maximise sales and take on long term and complicated projects which only they understand and this will make it difficult for shareholders to sack them. This is typical of most western economies and former chief executive officer of News international James Murdoch argues in Mctaggart lecture 2007, the only reliable perpetual guarantor of independence is profits signalling that maximising profits is the only compass to measure success. This is reflective of the neoclassical economic theory and this essay will examine the advantages and limitations of sales maximisation. . argument for the theory of sales maximisation but there is serious limitations and that is the behavioural difference between long run profit maximisation and sales maximisation that there are no conclusive econometric tests as the difference is very subtle. Therefore there has to be more future research into testing what the key differences are between sales and profits. Also there has to be one to one interviews into the psychology of Managers in the firms that they running as some argue for profits whilst some argue for sales e.g. James Murdoch speech. The use of postal questionnaires for use in studies can bring evidence that is not In summary that is conducted for Baumols hypothesis empirical evidence is not conclusive in favour for and against the sales maximisation hypothesis.
Subscribe to:
Posts (Atom)